Signal NVR2716 Bedienungsanleitung PDF herunterladen (Seite 28)

- 28 -

Pic 3.3.3.0 Netservice

【PPPoE setup】

Pic 3.3.3.1 PPPOE

Enable：Reverse■ means choose,setting can become effective.

Input the user name and password that ISP（Internet service provider）provides. After saving it

reboot up your system. Then the NVR will build a network connection based on PPPoE. The IP address

will change into dynamic IP address after above operation is well done.

Operation：After PPPoE dialing successfully look up the IP address in the [IP address] and obtain the

current IP address. Then use this IP address to visit the NVR through user port.

【NTP setup】

Pic 3.3.3.2 NTP setup

The NTP server must be installed in the PC.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 50 51

Keine Kommentare

Signal NVR2716 Bedienungsanleitung Seite 28